parPAC Cellulose Insulation - Heating & Cooling Test

PO Box 153 South Bristol ME 04568
53 Coveside Rd.
Toll Free 1-877-WE-REAL"R" (877-937-3257)
Fax 207-644-1503
E-Mail Us

par/PAC™ Heating & Cooling Test

	No Water or Glue - No Mess
	Superior Fire Resistance Cellulose Won't Melt like fiberglass
	Insulation Seals Best When It is Kept Dry and Dense Packed
	No Going Back To Put Up A Vapor Barrier Over Netting or unfaced batts
	No Costly Scheduling Delays to allow moisture to escape (Sheet Rock The Same Day)
	No Flimsy Vapor Barriers
	No Settling - Vistual Confirmation. (Min. 3 lbs. P.C.F. Density)
	Uniform Monolithically Sealed Airtight Walls, under floors & vaulted ceilings
	No License Fees or Expensive Equipment To Buy To become an Applicator. Minimal Equipment Investment
	Visual Inspection To Confirm The 3 lbs. P.C.F. Non-Settling Density
	Natural Air Change Rate as low as .17 Air Changes Per Hour
	STC=40 (75% Sound Reduction) in 2" x 4" walls and a Higher reduction in 2" x 6" walls
	True R-13 (2"x4") True R-20 (2"x6") R@3.0 P.C.F. = 12.6@3.5" = "R"20



Superior Fire Resistance and "R" Value of Cellulose Fiber Insulation. "R" Value Without Density and Air Leakage Sealing is Meaningless. WARNING - DO NOT ATTEMPT TO DUPLICATE THIS DEMONSTRATION WITH ANY OTHER TYPE OF INSULATION.

To Download PDF Manuals, Articles & Spec Sheets (Requires) Acrobat Reader
	Click on the Icon to get the latest version of Acrobat Reader

Below is a "page 10 extract" from the following article for the par/PAC™ insulation technology & applications.

"We use Par Pac insulation, which has been proven to reduce heating and cooling by 50 percent" Fred Miller, President, Miller Construction.

"We use Par Pac insulation, which has been proven to reduce heating and cooling by 50 percent" Fred Miller, President, Miller Construction.

BACK TO THE TOP

Applicators and Builders Wanted...
For Approximately $5,500
You Can Buy A New ACCU-1 A9400, You Can
Become a par/PAC™ Applicator or Builder. You may already have 90% of the equipment required.