parPAC Cellulose Insulation: Fiber Glass Convection Problem

PO Box 153 South Bristol ME 04568
53 Coveside Rd.
Toll Free 1-877-WE-REAL"R" (877-937-3257)
Fax 207-644-1503
E-Mail Us

Par/PAC™ - Documents

	No Water or Glue - No Mess
	Superior Fire Resistance Cellulose Won't Melt like fiberglass
	Insulation Seals Best When It is Kept Dry and Dense Packed
	No Going Back To Put Up A Vapor Barrier Over Netting or unfaced batts
	No Costly Scheduling Delays to allow moisture to escape (Sheet Rock The Same Day)
	No Flimsy Vapor Barriers
	No Settling - Vistual Confirmation. (Min. 3 lbs. P.C.F. Density)
	Uniform Monolithically Sealed Airtight Walls, under floors & vaulted ceilings
	No License Fees or Expensive Equipment To Buy To become an Applicator. Minimal Equipment Investment
	Visual Inspection To Confirm The 3 lbs. P.C.F. Non-Settling Density
	Natural Air Change Rate as low as .17 Air Changes Per Hour
	STC=40 (75% Sound Reduction) in 2" x 4" walls and a Higher reduction in 2" x 6" walls
	True R-13 (2"x4") True R-20 (2"x6") R@3.0 P.C.F. = 12.6@3.5" = "R"20



Superior Fire Resistance and "R" Value of Cellulose Fiber Insulation. "R" Value Without Density and Air Leakage Sealing is Meaningless. WARNING - DO NOT ATTEMPT TO DUPLICATE THIS DEMONSTRATION WITH ANY OTHER TYPE OF INSULATION.

To Download PDF Manuals, Articles & Spec Sheets (Requires) Acrobat Reader
	Click on the Icon to get the latest version of Acrobat Reader

Fiber Glass Convection Problem

Applicators and Builders Wanted...
For Approximately $5,500
You Can Buy A New ACCU-1 A9400, You Can
Become a par/PAC™ Applicator or Builder. You may already have 90% of the equipment required.